Wed, Oct 16, 2019

Department of Metallurgy and Materials Engineering

List of Publication (2007 onwards )

  • International Archival Journal:  71 (Seventy One)
  • Edited Conference proceeding: 24 (Twenty Four)

Details of Journal publication only (2007 onwards)

  1. S. K. Das, S. Chatterjee and S. Tarafder, “Effect of microstructures on deformation behaviour of high-strength low – alloy steel”, Journal of Material Science, 2009, Vol 44, pp- 1094-1100.
  2. K. L. Sahoo, Rina Sahu, M. Ghosh, S. Chatterjee; Studies on crystallization behavior and mechanical properties of Al-Ni-La metallic glasses; Bull. Mater. Sci., 2008, 31 (3), 433-439.
  3. A. Ghosh, Samar Das and S. Chatterjee “ Ageing Behaviour of a Copper Bearing Ultra High Strength Steel”, Materials Science and Engineering A, 2008, Vol 486, pp- 152-157.
  4. S. K. Das, S. Tarafder, A. K. Panda, S. Chatterjee and A. Mitra, “ Magnetic and Mechanical Properties of Cu- Strengthened aged HSLA-100 Steel”, Philosophical Magazine, 2007, Vol. 87, No: 32, P: 5065
  5. S.K. Das, N. Narasaiah, S. Sivaprasad, S. Chatterjee and S. Tarafder, “Effect of ageing on fatigue crack growth behabviour of Copper bearing HSLA-100 steel”, Materials science and Technology, 2007, Vol 23,No: 2
  6. S. Kundu, S. Chatterjee, D. Olson and B. Mishra: “Interface Microstructure and Strength Properties of the Diffusion Bonded joints of Titanium ôCu InterlayerôStainless Steel” Metallurgical and Materials Transactions A 39 (2008) 2106-2114
  7. S. Kundu and S. Chatterjee “Diffusion Bonding between Commercially Pure Titanium and Micro-Duplex Stainless Steel” Materials Science and Engineering A 480 (2008) 316-322
  8. S. Kundu and S. Chatterjee “Characterization of Diffusion Bonded Joint between Titanium and 304 Stainless Steel using a Ni Interlayer” Materials Characterizations, 59 (2008) 631-637
  9. S. Kundu and S. Chatterjee: “Effect of Reaction Products on Mechanical Properties of Diffusion Bonded of Titanium to 304 stainless steel with Cu interlayer Joints” The Transactions of The Indian Institute of Metals, 61 (2008) 457-464
  10. S. Kundu and S. Chatterjee “Mechanical Properties of Diffusion Bonded Joints between Titanium and Stainless Steel with a Nickel Interlayer” Materials science and Technology 23 (2007) 1167-1172
  11. S. Kundu and S. Chatterjee “Structure and Properties of Diffusion Bonded Transition Joints between Commercially Pure Titanium and 304 Stainless Steel Using Nickel Interlayer” Journal of Materials Science 42 (2007) 7906-7912 
  12. S. Kundu and S. Chatterjee “Microstructure and Mechanical Properties of Diffusion Bonded Joints between Titanium and Stainless Steel with Copper Interlayer” Science and Technology of Welding and Joining 12 (2007) 572-578
  13. S. Kundu and S. Chatterjee “Effect of Temperature on the Formation of Reaction Products and Strength Properties of Titanium and Stainless Steel joints Using Copper Interlayer” Materials science and Technology 23 (2007) 368-373
  14. S. Kundu, S. Chatterjee, D. Olson and B. Mishra, “Effects of Intermetallic Phases on the Bond Strength of Diffusion Bonded Joints between Titanium and 304 Stainless Steel using Nickel Interlayer” Metallurgical and Materials Transactions A, 38A (2007) 2053-2060
  15. B. Bhushan, A.Basumallick, S.K. Bandopadhyay., N.Y.Vasanthacharya, D. Das.:Effect of alkaline earth metal doping on thermal, optical, magnetic and dielectric properties of BiFeO3 nanoparticles, Journal of Physics D: Applied Physics, 42 (2009) 65004
  16. B.N.Mondal, A.Basumallick, D.N. Nath, P. P.Chattopadhyay:Phase evolution and magnetic behaviour of Cu-Ni-Co-Fe quaternary alloys synthesized by ball milling Materials Chemistry and Physics 116(2009) 358
  17. Gobinda Gopal Khan, A. Basumallick, N.R. Bandyopadhyay : Ab-initio pseudopotential study of electronic structure and chemisorption of oxygen on aluminium surface, Journal of Physics and Chemistry of Solids. 70 (2009)298
  18. Jaya Sarkar, Gobinda Gopal Khan, A. Basumallick : The microscopic origin of self organized nanostripe patterns formation on an electropolished aluminium, Nanotechnology 20(2009) 95604.
  19. Jaya Sarkar, Gobinda Gopal Khan, A. Basumallick : Photoluminescence of non-crystalline alumina nanowires synthesized by direct anodization of aluminium, Modern Physics Letters B  23 (2009) 1819
  20. B.Bhusan, S.Mukherjee, A. Basumallick, S.K. Bandyopadhyay, D.Das :  Low temperature route to the multiferroic: XRD and Mossbauer characterization, Hyperfine Interactions 187 (2008) 101
  21. B.N.Mondal, A. Basumallick, P..P Chattopadhyay:  Magnetic properties of binary Cu50-(Ni, Fe and Co) 50 alloys prepared by ball milling  and isothermal annealing, Materials Chemistry and Physics 110(2008)490
  22. B.N.Mondal, A. Basumallick, P..P Chattopadhyay:Magnetic behavior of nanocrystalline Cu-Ni-Co alloys prepared by mechanical alloying and isothermal annealing, Journal of Alloys and Compounds 457(2008)10
  23. Debdas Roy, Sumit Ghosh, A. Basumallick, Bikramjit Basu: Processing of Ti-aluminide reinforced in situ metal matrix composites by reactive hot pressing, J. Alloy Compounds 436 (2007) 107-111.
  24. Jaya Sarkar, Gobinda Gopal Khan, A. Basumallick: Nanowires: properties, applications and synthesis via porous anodic aluminium oxide template, Bulletin Mater Sci.   30 (2007) 271-290.
  25. S.Ghosh, S.K.Naskar, A.Basumallick : Effect of hot rolling on the properties of in-situ Ti-aluminide and alumina reinforced aluminium matrix composites, J. Materials and manufacturing processes 22 (2007)683-686
  26. A.Basumallick , S.Ghosh : Processing of In-situ aluminium matrix composites by micropyretic reactive sintering, J. Materials and manufacturing processes 22 (2007) 692-695.
  27. N.R.Bandyopadhyay, S.Ghosh and A. Basumallick: New generation metal matrix composites,  J. Materials and manufacturing processes 22 (2007) 679-682.
  28. P. Deb, A. Basumallick, S. Das : Controlled synthesis of monodispersed superparamagnetic nickel ferrite nanoparticles,     Solid State Communications 142 (2007) 702–705.
  29. B.N Mondal, A. Basumallick, P.P. Chattopadhyay : Effect of isothermal treatments on the magnetic behavior of nanocrystalline Cu-Ni- Fe alloy prepared by mechanical alloying, J. Magn & Mag. Mater 309(2007) 290-294.
  30. S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: Dilatometric studies on copper added titanium – boron steels; Steel Research International 78 (2007) 903.
  31. S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: Effect of pre - strain on the ageing behaviour of directly air – cooled copper added titanium – boron microalloyed steels; Materials Science and Technology 23 (2007) 923.
  32. S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: Effect of copper additions in directly quenched titanium – boron steels; Journal of Materials Science 42 (2007) 9453.
  33. S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: Mechanical properties of directly air cooled copper added microalloyed steels; Materials Science and Technology 23 (2007) 1375.
  34. S. K. Ghosh and S. Mondal: Effect of heat treatment on microstructure and mechanical properties of duplex stainless steel; Transactions of the Indian Institute of Metals 61 (2008) 33.
  35. S. K. Ghosh, S. Ganguly, P. P. Chattopadhyay and S. Datta: Determination of MS temperature in copper bearing microalloyed steel by the ANN technique; Canadian Metallurgical Quarterly 47 (2008) 91.
  36. S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: Effect of pre - strain on the ageing behavior of directly quenched copper containing microalloyed steel; Materials Characterization 59 (2008)1227.
  37. S. K. Ghosh and S. Mondal: High temperature ageing behavior of a duplex stainless steel; Materials Characterization 59 (2008)1776.
  38. S. K. Ghosh, A. Haldar, S. Ganguly and P. P. Chattopadhyay: Development of high strength Cu – Ni - Ti - B multiphase steel by direct air – cooling; Metallurgical and Materials Transactions A 39A (2008) 2555.
  39. S. K. Ghosh, P. P. Chattopadhyay, A. Haldar, S. Ganguly and S. Datta: Design of the directly air – cooled pearlite - free multiphase steel from CCT diagrams developed using ANN and dilatometric methods; ISIJ International 48 (2008) 649.
  40. S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: The influence of copper addition on microstructure and mechanical properties of thermomechanically processed microalloyed steels; Journal of Materials Science 44 (2009) 580.
  41. S. K. Ghosh, S. Ganguly, P. P. Chattopadhyay and S. Datta: Effect of copper and microalloying (Ti, B) addition on tensile properties of HSLA steels predicted by ANN technique; Ironmaking and Steelmaking 36(2009)125.
  42. S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: On the copper precipitation behaviour in thermomechanically processed low carbon microalloyed steels; Materials Science and Engineering A (2009) Article in Press.
  43. D. Das, A. K. Dutta, K. K. Ray: Correlation of microstructure with wear behaviour of deep cryogenically treated AISI D2 steel; Wear (2009) in press, DOI:10.1016/j.wear.2008.12.051.
  44. D. Das, A. K. Dutta and K. K. Ray, Inconsistent wear behaviour of cryotreated tool steels: role of mode and mechanism; Materials Science and Technology (2009) in press, DOI 10.1179/174328408X374685.
  45. D. Das, K. K. Ray, A. K. Dutta: Influence of temperature of sub-zero treatments on the wear behaviour of die steel; Wear (2009) in press, DOI:10.1016/j.wear.2008.07.001.
  46. D. Das, P.P. Chattopadhyay: Influence of martensite morphology on the work-hardening behavior of high-martensite dual-phase steel; Journal of Material Science 44 (2009) 2957.
  47. D. Das, A. K. Dutta, K. K. Ray: Optimization of the duration of cryogenic processing to maximize wear resistance of AISI D2 steel; Cryogenics 49 (2009) 176.
  48. D. Das, A. K. Dutta, K. K. Ray: On the refinement of carbide precipitates by cryotreatment in AISI D2 steel; Philosophical Magazine 89 (2009) 55.
  49. D. Das, A. K. Dutta, K. K. Ray: Influence of varied cryotreatment on the wear behavior of AISI D2 steel; Wear 266 (2009) 297.
  50. D. Das, A. K. Dutta, K. K. Ray: On the enhancement of wear resistance of tool steels by cryogenic treatment; Philosophical Magazine Letters 88 (2008) 801.
  51. A. Halder, D. Das, P. P. Chattopadhyay: Texture and microstructure development in copper after cryogenic rolling and heat treatment; Ceramic Transactions 201 (2008) 83.
  52. D. Das, A. Samanta, P.P. Chattopadhyay: Synthesis of Bulk Nano-Al2O3 Dispersed Cu-Matrix Composite using Ball Milled Precursor; Materials and Manufacturing Processes 22 (2007) 517.
  53. D. Das, A.K. Dutta, V. Toppo, K.K. Ray: Effect of Deep Cryogenic Treatment on the Carbide Precipitation and Triboligical Behaviour of D2 Steel; Materials and Manufacturing Processes 22 (2007) 474.
  54. M. Ghosh, A.H. van den Boggaard, S. Kukukuri and A. G. Miroux: Thermo-mechanical forming of Al-Mg-Si sheet;Computer Methods in Materials Science, 9 (2009) 5
  55. M.S. Kaiser, S. Datta, A. Roychowdhury and M.K. Banerjee: Age hardening behavior of wrought Al-Mg-Sc alloy: Materials and Manufacturing Processes, vol. 23 (2008) issue 1 pp 74-81.
  56. R.Sen, S.Kaiser, M.K.Mitra and M..K. Banerjee: Plane strain fracture toughness of Scandium doped Al-6Mg alloys, J.Alloys and Comp. 457(2008) 135-143.
  57. M.S. Kaiser, S. Datta, A. Roychowdhury and M.K. Banerjee: Ageing effect of ternary and quaternary additions on the fracture toughness behavior of cast Al-Mg alloys –J.IE (I), MM Div, vol.88(2007), October, pp 3-9.
  58. H. Maneshian and M.K. Banerjee: Reverse martensitic transformation in alumina-15 vol% zirconia nanostructure powder synthesized by high energy ball milling: J. Alloys and Compounds (2007) doi 10.1016/J.Jallcom.
  59. M.S. Kaiser, P.M.G.Nambissan, M.K. Banerjee, A.Sachdeva,P.K.Pujari: Positron life time studies and co-incidence Doppler broadening spectroscopy of Al-6Mg-xSc(x=0 to .6 wt%) alloys: J.Mater.Sci(2007)42:2618-2629.
  60. M.S. Kaiser, S. Datta, A. Roychowdhury and M.K. Banerjee: Effect of scandium on the microstructure and ageing behavior of cast Al-6Mg alloy –Accepted for publication in Materials Characterization.
  61. M.S. Kaiser, S. Datta, A. Roychowdhury and M.K. Banerjee: Effect of-scandium additions on the tensile properties of cast Al-6Mg alloys –Accepted for publication in Journal of Materials Engineering and Performance.
  62. Mallar Ray, Kakali Jana, N.R. Bandyopadhyay, S.M. Hossain, Daniel Navarro-Urrios, P.P. Chattyopadhyay, Martin A. Green, Blue-violet Photoluminescence from colloidal Suspension of Nanocrystalline Silicon in Silicon Oxide Matrix, 149 (2009) 352.
  63. S. Ganguly, S. Datta, P.P. Chaottopadhyay and N. Chakraborti: Designing the Multiphase Microstructure of Steel for Optimal TRIP Effect: A Multi-objective Genetic Algorithm Based Approach, Materials and Manufacturing Processes, 24 (2009) 31.
  64. K. P. Das, S. Ganguly, P. P Chattopadhyay, S. Tarafder and N. R. Bandyopadhyay: Exploring the Possibilities of Development of Directly Quenched TRIP–aided Steel by ANN Technique, Materials and Manufacturing Processes, 24 (2009) 68.
  65. M. Kundu, S. Ganguly, S. Datta and P.P. Chattopadhyay : Simulating Time Temperature Transformation Diagram of Steel Using Artificial Neural Network, Materials and Manufacturing Processes, 24 (2009) 169.
  66. A. Patra, S. Ganguly, M.S. Kaiser, P.P. Chattopadhyay and S. Datta: Effect of Quaternary Zirconium Addition on Mechanical Properties of Al -6Mg-Sc (0.2-0.6 wt %) Alloy Studied by ANN Technique, Int. J. Mechatronics and Manufacturing Systems (in press).
  67. S. Dey, S. Datta, P.P. Chattopadhyay and J. Sil, Modeling the property of TRIP steel using AFIS: A distributed approach, Computational Materials Science 43 (2009) 501-511.
  68. I. Manna, P.P. Chattopadhyay, F. Banhart, J. Croopnick and H.-J. Fecht, Microstructural Evolution of Wear-resistant FeCrB and FeCrNiCoB Coating Alloys During High-energy Mechanical Attrition, Wear 264 (2008) 940.
  69. A. Samanta, I. Manna and P. P. Chattopadhyay, Phase Evolution in Al – Ni – (Ti, Nb, Zr) Powder Blends by Mechanical Alloying, Materials Science and Engineering A, 464 (1-2) (2007)306
  70. A. Samanta, P. P. Chattopadhyay, H. –J. Fecht and I. Manna, Development of Amorphous Phase Dispersed Al-Rich Composites by Rolling of Mechanically Alloyed Amorphous Al-Ni-Ti Powders with Pure Al, Materials Chemistry and Physics, 104 (2007) 434.
  71. P. P. Chattopadhyay, A. Samanta, W. Lojkowski H. –J. Fecht and I. Manna, Microstructure/Phase Evolution in Mechanical Alloying/Milling of Stainless Steel and Aluminium Powder Blends, Metallurgical and Materials Transaction A, 38(13) (2007) 2298.