IIEST, Shibpur

Indian Institute of Engineering Science and Technology, Shibpur

(Formerly Bengal Engineering and Science University, Shibpur)

Empowering the nation since 1856

आई आई ई एस टि, शिवपुर

भारतीय अभियांत्रिकी विज्ञान एवं प्रौद्योगिकी संस्थान, शिवपुर

(पूर्व में बंगाल इंजीनियरिंग एंड साइंस यूनिवर्सिटी)

१८५६ से देश को सशक्त बनाना

Dr. Swarup Kumar Ghosh
Dr. Swarup Kumar Ghosh   Dr. Swarup Kumar Ghosh
Professor ,   Metallurgy And Materials Engineering
 
  • Ph. D., 2007, Bengal Engineering and Science University, Shibpur.
  • M.E. (Met), 1995, B. E. College (D.U.).
  • B.E. (Met), 1993, Calcutta University.
 

 

Contact Addresses
  Residence Flat No. A-3, 3/4, Madhusudan Das Lane,
Howrah-711 103, West Bengal, India
  Phone (office) +91 - 33 - 26684561/62/63 Ext. 460
  Mobile  
  email skghosh@metal.becs.ac.in, swarupghosh2001@rediffmail.com, skghosh2002in@yahoo.co.in  

 

Research Areas
  • Phase Transformation.
  • Ferrous and non-ferrous alloys.
  • ANN modelling study.

 

Recent Publications
  • S.K.Ghosh and S.Chatterjee, 2000, Development of Diffusion Bonded Joints of Ti-6Al-4V and 304L Stainless Steel, Abstracts Vol. of 7th West Bengal State Science and Technological Congress, J.U., Calcutta – 32., Abstracts Vol. of 7th West Bengal State Science and Technological Congress, 3, MMM -9.
  • S. K. Ghosh, D. Das and P. P. Chattopadhyay: Structure Property Correlation of Ti, B Microalloyed Dual Phase Steels, Journal of the Institution of Engineers (India), Vol. 82, No. MM/2, (2001), pp. 50 - 57.
  • S. K. Ghosh, A Samanta and P. P. Chattopadhyay: Effects of Ageing Treatment on the Microstructure and Mechanical Properties of Cu - added Ti, B Microalloyed Steels, Transactions of the Indian Institute of Metals, Vol. 57, No. 2, 2004, pp.171 –180.
  • S. K. Ghosh, N. R. Bandopadhyay and P. P. Chattopadhyay: Effects of Finish Rolling Temperature on the Microstructures and Mechanical Properties of as Hot Rolled Cu – added Ti, B Microalloyed Dual Phase Steels, Journal of the Institution of Engineers (India), Vol. 85, No. MM/2, 2004,  pp. 41- 48.
  • S. K. Ghosh, S. Ganguly, P. P. Chattopadhyay and S. Datta: Modelling the Effect of Copper on Hardness of Microalloyed Dual Phase Steel through Neural Network and Neuro-fuzzy Systems, ISIJ International, Vol. 45, No. 9, 2005, pp. 1345 – 1351.
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: Dilatometric studies on copper added titanium – boron steels; Steel Research International 78 (2007) pp. 903- 907.
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: Effect of pre - strain on the ageing behaviour of directly air – cooled copper added titanium – boron microalloyed steels; Materials Science and Technology 23 (2007) pp. 923-929.
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: Effect of copper additions in directly quenched titanium – boron steels; Journal of Materials Science 42 (2007) pp. 9453-9459.
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: Mechanical properties of directly air cooled copper added microalloyed steels; Materials Science and Technology 23 (2007) pp.1375-1380.
  • S. K. Ghosh and S. Mondal: Effect of heat treatment on microstructure and mechanical properties of duplex stainless steel; Transactions of the Indian Institute of Metals 61 (2008) pp. 33-37.
  • S. K. Ghosh, S. Ganguly, P. P. Chattopadhyay and S. Datta: Determination of MS temperature in copper bearing microalloyed steel by the ANN technique; Canadian Metallurgical Quarterly 47 (2008) pp.91-97.
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: Effect of pre - strain on the ageing behavior of directly quenched copper containing microalloyed steel; Materials Characterization 59 (2008) pp. 1227-1233.
  • S. K. Ghosh and S. Mondal: High temperature ageing behavior of a duplex stainless steel; Materials Characterization 59 (2008) pp. 1776-1783. 
  • S. K. Ghosh, A. Haldar, S. Ganguly and P. P. Chattopadhyay: Development of high strength Cu – Ni - Ti - B multiphase steel by direct air – cooling; Metallurgical and Materials Transactions A 39A (2008) pp. 2555-2568.
  • S. K. Ghosh, P. P. Chattopadhyay, A. Haldar, S. Ganguly and S. Datta: Design of the directly air – cooled pearlite - free multiphase steel from CCT diagrams developed using ANN and dilatometric methods; ISIJ International 48 (2008) pp. 649-657.
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: The influence of copper addition on microstructure and mechanical properties of thermomechanically processed microalloyed steels; Journal of Materials Science 44 (2009) pp. 580-590. 
  • S. K. Ghosh, S. Ganguly, P. P. Chattopadhyay and S. Datta: Effect of copper and microalloying (Ti, B) addition on tensile properties of HSLA steels predicted by ANN technique; Ironmaking and Steelmaking 36(2009) pp. 125-132.
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: On the copper precipitation behaviour in thermomechanically processed low carbon microalloyed steels; Materials Science and Engineering A, 519 (2009) pp. 88- 93.
  • S. K. Ghosh, N. Bhowmik, A. Haldar and P. P. Chattopadhyay: Effects of Cu addition on the synergistic effects of Ti - B in thermomechanically processed low carbon steels, Materials Science and Engineering A, A527 (2010) pp. 1082-1088. 
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: Effect of ageing on the mechanical properties of directly quenched copper bearing microalloyed steels, Materials Chemistry and Physics, 119 (2010) pp. 436-441. 
  • H. L. Yi, S. K. Ghosh, W. Liu, K. Lee and H. K. D. H. Bhadeshia: Non-equilibrium solidification and ferrite in -TRIP steel, Materials Science and Technology, 26 (7) (2010) pp. 817- 823.
  • S. K. Ghosh and S. Chatterjee: On the direct diffusion bonding of titanium alloy to stainless steel, Materials and Manufacturing Processes, 25 (2010) pp. 1317–1323. 
  • S. K. Ghosh, P. Mallick and P. P. Chattopadhyay: Effect of reversion of strain induced martensite on microstructure and mechanical properties in an austenitic stainless steel, Journal of Materials Science, 46 (2011) pp. 3480-3487. 
  • P. S. Bandyopadhyay, S. Kundu, S. K. Ghosh and S. Chatterjee, Structure and properties of a low-carbon, microalloyed, ultra-high-strength steel, Metallurgical and Materials Transactions A, 42A, (2011) pp. 1051-1061.
  • S. K. Ghosh: Influence of cold deformation on the aging behaviour of Al-Cu-Si-Mg alloy, Journal of Materials Science and Technology, 2011, 27(3), pp. 193-198. 
  • N. Bhowmik, S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: High strength low carbon hot rolled -ferritic steel: microstructure and mechanical properties, Materials Science and Technology 27 (11) (2011) pp. 1718-1723. 
  • P. S. Bandyopadhyay, S. K. Ghosh, S. Kundu and S. Chatterjee: Evolution of microstructure and mechanical properties of thermomechanically processed ultrahigh strength steel, Metallurgical and Materials Transactions A, 42A (2011) pp. 2742- 2752. 
  • S. Chatterjee, S. K. Ghosh, P. S. Bandyopadhyay and Sanak Mishra: Phase transformation and mechanical properties of an ultrahigh strength steel, Journal of Iron and Steel Research International, 18, (Supplement 1-1) (2011) pp. 192-199. 
  • N. Bhowmik, S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: Low carbon high manganese bainitic steel, Materials Science and Technology (2011) Article in Press. 
  • S. K. Ghosh, P. Mallick and P. P. Chattopadhyay: Effect of Cold Deformation on Phase Evolution and Mechanical Properties in an Austenitic Stainless Steel for Structural and Safety Applications, Accepted in Journal of Iron and Steel Research International, 2011. 
  • S. K. Ghosh, P. S. Bandyopadhyay, S. Kundu and S. Chatterjee: Copper bearing microalloyed ultrahigh strength steel on a pilot scale: microstructure and properties, Materials Science and Engineering A, 528 (2011) pp. 7887-7894. 
  • S. K. Ghosh, Shikhar, P. Mallick and P. P. Chattopadhyay: Influence of Mechanical Deformation and Annealing on Kinetics of Martensite in a Stainless Steel, Accepted in Materials and Manufacturing Processes, (2011).
  • S. K. Ghosh, D. Mahata, R. Roychaudhuri and R. Mondal: Effect of rolling deformation and solution treatment on the microstructure and mechanical properties of a cast duplex stainless steel, Accepted in Bulletin of Materials Science (2011).  
  • S. K. Ghosh, and P. P. Chattopadhyay: Effect of Minor Cu - Addition on Microstructural Evolution in Ti, B Microalloyed Dual Phase Steel, Asia Steel International Conf. Proc. (2003), Tata Steel, Jamshedpur, India, Vol. 3, 2003, pp. 3.c.4.1- 3.c.4.8.
  • S. K. Ghosh and P. P. Chattopadhyay: Microstructural Evolution in Cu - added Ti, B Microalloyed Dual Phase Steel, Proc. Int. Conf. on Advances in Materials & Processes for Industrial Applications and Materials Show 2003, ASM International, Pune Chapter, Pune, India, 2003, Technical Vol., pp. 35 – 42.
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhyay: Effect of Cu Addition in Multiphase Ti, B Microalloyed Steel, Proc. Int. Conf on Advances in Materials and Materials Processing, IIT Kharagpur, 2006, pp. 551-558.
  • S. K. Ghosh, P. Pal, P. P. Chattopadhyay and S. Datta: ANN Model for Assessment of MS Temperature in copper added Ti, B Microalloyed Steel, Proc. Int. Conf. on Advances in Materials and Materials Processing, IIT Kharagpur, 2006, pp. 559-566.
  • S. K. Ghosh, S. Ganguly, S. Datta, A. Haldar and P. P. Chattopadhyay: Design of Pearlite Free Air - Cooled Cu – added Ti, B Microalloyed Steel Using ANN prediction of CCT Diagrams, Proc. Int. Workshop on Neural Network and Genetic Algorithm in Materials Science and Engineering, BESUS, 2006, pp. 397 – 411.
  • S. K. Ghosh: Effect of Pre-strain on the natural and artificial ageing behaviour of 2014 aluminium alloy, Proc. Int. Conf. on Recent Advances in Materials and Material Processing, PSG College of Technology, Coimbatore, 2006, pp. 1-5.
  • S. K. Ghosh, A. Haldar and P. P. Chattopadhya: Ageing Behaviour of Directly Quenched Copper Added Titanium - Boron Microalloyed Steels, Proc. Int. Conf. on Microalloyed Steels: Emerging Technologies and Applications, Kolkata, 2007, pp. 298 – 305.
  • S. K. Ghosh, S. Ganguly, P. Pal, A. Haldar and P. P. Chattopadhyay: Cu – Ni - Ti – B Multiphase Steel, Proc. Int. Conf. on Microalloyed Steels: Emerging Technologies and Applications, Kolkata, 2007, pp. 269 – 280.
  • N. Bhowmik, S Das, S. K. Ghosh, P. P. Chattopadhyay and A. Haldar: Evolution of microstructures and properties in a high Mn bainitic steel, International Conference on High Manganese Steels, May 15-18, Seoul, South Korea, 2011.
  • N. Bhowmik, S. Das, S. K. Ghosh, P. P. Chattopadhyay and A.Haldar: Development of low carbon high strength high ductility steel, International Conference on High Manganese Steels, May 15-18, Seoul, South Korea, 2011.

Courses Undertaken
  •  


Department of Metallurgy And Materials Engineering , BESU, Shibpur - 7111 03, INDIA